SmartHome DocsWireless Connectivity Guide (Matter)
Connect your SmartHome air conditioner over Matter to Alexa, Google Home or Apple Home, set it up with the SmartHome app, and check the wireless specification.
Important note
Read the manual carefully before installing or connecting your air conditioner. Make sure to save this manual for future reference.
1. How to use Matter
Connect Your Air Conditioner through Matter
Before you start
- Make sure your mobile device is connected to your wireless router.
- Wireless router should support IPv6.
- For best Matter compatibility, connect the AC to the Alexa, Google Home or Apple Home ecosystems along with at least one of their respective Matter enabled smart speakers.
Select your preferred ecosystem (Alexa, Google Home or Apple Home) and make sure you've got one of their Matter enabled products (such as their smart speakers) connected to your wireless router.
Turn on Bluetooth on your mobile device.
Put the air conditioner into pairing mode.
- Window AC: Hold down the CONNECT button for 3 seconds to begin the pairing process ("AP" will appear on the AC's display).
- Portable AC: Hold down the SWING button for 3 seconds to begin the pairing process ("AP" will appear on the AC's display).
Note
Entering AP pairing mode may vary between different AC, please follow the instructions on the AC panel.
Open the Alexa, Google Home or Apple Home app on your mobile device.
Tap the "+" and "Add Device/Accessory" or tap "+Add" in your app and then select Matter device and scan the Matter QR code found on the side of the AC device. Follow the respective instructions in the Alexa, Google Home or Apple Home app to complete the pairing process.
After pairing is successful, you can control your AC's temperature and mode settings, etc. through the respective ecosystem app and/or smart speaker.
Minimum versions for Matter
App & Smart Speakers can support Matter only when using these versions or above.
| Device | Version |
|---|---|
| iPhone | iOS 16.5 |
| Apple Home Pod | 16.5 |
| Android | Google Play services min version: 22.36.15 Google Home app (GHA) min version: 2.58.24.1-dogfood |
| Google Home Hub | Google Hub firmware min version: 1.56.324896 (appears on hub as Chromecast firmware version) |
| Alexa App | 2.2.536317 |
| Alexa Echo Device | 9094439556 |
Note
- Setup processes and features may vary between ecosystems.
- Make sure the Matter enabled app is up to date to ensure the best experience.
- Periodically, we will update the device's software to improve the experience. Device software updates can be accomplished through the SmartHome app.
2. How to use SmartHome App
Before you start
Ensure that your mobile phone is connected to the wireless network. Bluetooth must be turned on. The device must also be powered up.
Step 1: Download the SmartHome app
Scan the QR code below to download the SmartHome app from the app store or search for it directly on the Google Play Store or Apple's App Store.
Step 2: Log in
Open the SmartHome app. Log in directly if you have an existing SmartHome account or create a new account. Alternatively, you can also use a 3rd party login platform.
Step 3: Connecting the device
When you log in, you may see the message "Smart devices discovered nearby". Tap to add your device.
If no such message appears, proceed as follows: Tap on "+" and select your device in the list of nearby available devices. If your device is not listed, please add your device manually, first selecting the device category e.g. Portable AC.
Follow the steps in the app to connect your device to the wireless network. If your device fails to connect, follow the additional instructions in the app.
Step 4: Controlling the device
After pairing successfully, a card will be created for the device in the SmartHome app.
Shortcuts for basic functions will appear on the card such as changing the temperature or switching the device on or off.
Tapping on the card will reveal additional features and settings. The actual UI design may look different from examples due to app updates.
3. Specification
| Item | Value |
|---|---|
| Wireless Module Model | US-SK109 |
| Antenna Type | Printed PCB Antenna |
| Frequency Band | 2400–2483.5 MHz |
| Operation Temperature | 0°C |
| Operation Humidity | 10%~85% |
| Power Input | DC 5V / 500mA |
| Maximum TX Power | <20dBm |
Declaration of conformity
FCC ID: 2ADQOMDNA23 IC: 12575A-MDNA23
This device complies with Part 15 of the FCC Rules and Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device.
Only operate the device in accordance with the instructions supplied. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
Wi-Fi Control & Intelligent Speaker
Control your Midea Wi-Fi air conditioner with the Midea Air app, troubleshoot the most common connection problems, and link it to Amazon Echo or Google Home for voice control.
AI SmartHome Camera App
Install the AI SmartHome app, add your gateway and cameras, and learn how to view live video, play back recordings, and configure recording, alarm, light, and PIR settings.