PortaSplit (Two-Part Air Conditioner)

Please read this manual before using this product and retain it for future reference. Due to ongoing product improvement, the design and specifications may vary from the actual unit. All diagrams are therefore for reference only and the actual unit is to be considered as standard. Thank you for choosing Midea!

• Do not lift the appliance by the hose. Always use the handles.
• Do not pull the unit by the power cord or tubing.
• Plastic bags and other packaging are not toys and may be dangerous to children.
• Do not allow children to play with the device or its remote control. Children must be supervised around the unit at all times.
• Do not sit on the unit. Doing so is likely to result in injury from falling or damage to the unit.
• Do not place objects on the unit as this may cause malfunctioning or product damage.
• Do not place or use flammable items, such as spray cans, within 1 meter of the air outlets as this may cause a fire or even an explosion.
• Do not place objects near the outdoor unit as they may inhibit air flow and cause damage. Keep the unit free from leaves and other debris.
• Do not place your fingers or objects in the air inlets or outlets. Contact with the high speed fan blades may lead to personal injury or product damage.
• If an abnormal situation arises such as a burning smell, immediately turn off the unit and disconnect the power. Contact the dealer for further instruction as further operation may lead to electric shock, fire or injury.
• Do not expose plants or animals directly to the airflow from the unit.
• Avoid impacts to the indoor and outdoor units, or otherwise product damage may result.
• Do not climb onto or place objects on top of the outdoor unit.
• This appliance has wheels. Be careful of obstacles or thick carpets, as the device may tip.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Cleaning and user maintenance shall not be made by children without supervision. It is not a toy.
• Do not place objects that are susceptible to moisture directly beneath the indoor and outdoor units or refrigerant pipes. Under certain conditions, condensation may occur resulting in damage to the object concerned.
• To avoid oxygen depletion, ensure that the room is adequately ventilated if equipment such as a burner or a heater is used together with the air conditioner.
• Do not operate the air conditioner in a wet room such as a bathroom or laundry. Too much exposure to moisture can cause electrical components to short circuit.
• Do not expose your body directly to cool air for a prolonged period of time.
• In certain functional environments, such as kitchens, server rooms, etc., the use of specially designed air-conditioning units is highly recommended.
• Decommissioning may only be carried out by qualified personnel.
• Turn off the air conditioner and disconnect the power if you do not intend to use it for a long time.
• Switch off and unplug the unit during storms.
• Do not use the device for any other purpose than its intended use.
• Avoid operating the appliance for long periods of time with doors or windows open, or if the humidity is very high.
• Do not use any agents other than those recommended by the manufacturer to speed up the defrosting process or for cleaning.
• Do not place or use the indoor unit of the device outdoors.
• Do not operate during snowfall. After snowfalls, ensure the outdoor unit air inlet is not blocked by snow.
• Do not touch the cooler fins, as they are sharp.

Wireless module: We declare that the wireless module is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Fuse specifications: The specification for the fuses used for overcurrent protection are printed on the circuit board (PCB), for example: T20A/250VAC.

• Do not operate the appliance with wet hands. This may cause electric shock.
• Do not modify the power cord or plug in any way. If the power cord is damaged, it must be replaced by the manufacturer, a service agent or similarly qualified persons.
• Do not attempt to make any modifications to the wiring or open the control board as it may lead to overheating, fire, electrical shock, injury or death.
• Do not pull on the power cord to unplug the unit as this may damage the cord and lead to fire or electric shock. Hold the plug firmly and pull it from the outlet.
• Do not modify the length of the power cord or use an extension cord to power the unit as it may lead to overheating or electric shock.
• Plug the device directly into the wall socket. Do not use power extensions, splitters or multi-plug adapters as this may overload the circuitry and cause fire or damage.
• Keep the power plug clean. Remove any dust or grime that accumulates on or around the plug. Dirty plugs can cause fire or electric shock.
• Ensure that the connection side is earthed.
• Maintenance and repair work on electrical components may only be carried out by an expert.
• Components may only be replaced with parts specified by the manufacturer. Improper component replacement can lead to the ignition of refrigerant in the atmosphere due to leakage.
• In the event of damage or malfunctions, please contact your specialist dealer or our customer service.

Do not use the device outside of the temperature ranges specified below as damage may occur. For outdoor temperatures below 0°C, inspect the base plate (bottom plate of the outdoor unit) for accumulation of ice. If there is ice, turn the device off immediately as continued use will damage the unit.

Illustrations in this manual are for explanatory purposes. The actual shape of your indoor unit may be slightly different.

To be able to place the outdoor unit on the window sill, it must have a depth of at least 30 cm. The installation surface should be fairly level. Additional protection may be required during strong winds. Do not hang the unit from the steel rope.

To avoid serious injury to people below or damage to property, the bracket must be secured with the steel rope provided before installation. During the entire installation process, the bracket must always be held by one hand to prevent it from falling. Always observe local regulations and standards for positioning the outdoor unit and bracket. The window frame and the wall must be able to support the weight of the bracket and outdoor unit.

It is normal for the unit to produce condensation during operation. The condensate should be allowed to drain from the condensation water outlet of the outdoor unit. A drainage pipe may be used to guide the water, but the pipe must always be lower than the water outlet. For more information see the section Condensation water.

You can lock the wheels in place using the rubber wheel stoppers included in the accessories. Simply place them under the wheels.

If you would prefer not to use the window sealing cloth, a window lock system is provided to minimize the window gap.

When the unit is not used for a long time, or is used in a different location, follow these instructions to remove the outdoor unit.

• Please transport the unit carefully.
• This should not be done by children.
• Place on a level surface. Uneven or inclined surfaces may cause the unit to move and result in injury or damage.
• To reduce risk of damage to the device, store vertically.

With most window types, the window can be closed even when the bracket is installed. If you want to uninstall the bracket, attach the steel rope, unscrew both screws and simply lift the bracket and bring it inside. When removing the bracket, always hold it with at least one hand to prevent it from falling.

For better insulation, a window sealing cloth is provided. You can install the window sealing cloth and pass the refrigerant hose through the zipper. If needed, a sealing sponge is provided in the accessories to prevent rainwater from running along the hose.

For most window profiles, the installed support legs are suitable. For windows with a larger distance from window ridge to the wall (approximately 14 cm), the support legs can be substituted with the shorter support legs provided.

It is normal for the indoor unit to produce condensation. This is contained within the unit and automatically pumped to the outside unit. The indoor unit also has a drainage outlet, allowing you to manually drain any condensate not yet pumped to the outside unit, should you wish to do so (for example, before placing the unit into storage, or if a water pump drainage malfunction occurs).

During heating mode, condensation water may also collect on the hose between the indoor and outdoor units. This cannot be drained by the system. Please regularly check the hose and wipe it dry if needed. Use scissors to cut a suitable length of insulation sponge and wrap the hose with it.

The remote control requires 2 × AAA batteries. These may or may not be provided with your model.

1. Slide the back cover of the remote control downward, exposing the battery compartment.
2. Insert the batteries, paying attention to match up the (+) and (-).
3. Slide the battery cover back into place.

• Do not mix old and new batteries, or batteries of different types.
• Do not leave batteries in the remote control if you don't plan on using the device for more than 2 months.
• Do not dispose of batteries as unsorted municipal waste. Refer to local laws for proper disposal of batteries. A chemical symbol (e.g. Pb: Lead, >0.004%) at the bottom of the disposal icon means the battery contains a heavy metal above a certain concentration.

While using the remote, only relevant information is shown on the screen. The display can indicate low battery, ION function, Sleep mode, Follow me, Access Point (AP), the current mode (Auto / Cool / Dry / Heat / Fan), transmission, ECO, Timer ON/OFF, lock status, temperature/timer/fan-speed values, fan speed (Auto / Silent / Low / Med / High) and louvre swing.

Compatible with iOS and Android. Older phones may not be supported. Midea makes no guarantee of compatibility and is not responsible for issues arising as a consequence. The app is subject to updates without prior notice for product function improvement.

The following wireless protocols are supported: WPA-PSK / WPA2-PSK / WPA3-SAE. It may be used with or without encryption, although encryption is strongly recommended.

Preparing to connect: Connect your phone to the wireless network (2.4 GHz). Have the network password at hand. Enable Bluetooth on your phone.

Network issues may cause timeouts. The unit display and the app may become desynchronized, but this should resolve itself automatically. Should the issue persist, run the configuration process again. A change in the wireless network will require reconfiguration of the device.

Restore to factory settings: deleting the device in the app will reset the wireless configuration on the device.

• Always unplug the unit before cleaning or servicing.
• Do not use flammable liquids or chemicals to clean the unit.
• Do not wash the unit with water. Electrical danger.
• Check the appliance at regular intervals for mechanical damage.
• Pay attention to the flexible refrigerant hoses for any mechanical damage or excessive stress due to torsion or other forces; if so, inform customer service.
• Do not operate the unit without a filter. Dirt and lint will clog the AC and reduce performance and cause damage.

If the following codes are encountered, turn off the unit, discontinue use and contact the service centre immediately:

The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. Any updates to the manual will be uploaded to the service website — please check for the latest version.

Manufacturer: GD Midea Air-Conditioning Equipment Co., Ltd. Lingang Road, Beijiao, Shunde, Foshan, Guangdong, People's Republic of China 528311.